合格的防撞扶手

首先，目前質量好的無障礙扶手基本是采用了具有抗菌功能的工程塑料或者合成塑料制造，外表顏色可以根據不同的場所進行確定，有紅色、黃色、藍色等多種顏色選擇，這樣便于老年人和殘疾人容易看清扶手的位置，還能起到一定的裝飾作用。醫院扶手

First of all, current good quality barrier-free rail is adopted which has the function of antibacterial basic engineering plastic or synthetic plastics manufacturing, appearance, color can be determined, according to the different places have red, yellow, blue and so on a variety of color choices, so convenient for the elderly and disabled people easy to see the location of the armrest, also can have certain adornment effect.

第二，無障礙扶手的外表沒有連接的縫隙，不能帶粗糙刺手的塑料毛邊，否則會影響把握時的手感。

Second, barrier-free rail appearance without connection gap, cannot take the plastic burrs of rough stab hands, otherwise it will affect to grasp the handle.

第三，不銹鋼管的壁厚起碼要達到2mm以上，在體重達到75kg的人垂直下壓不會產生彎曲和變形。

Third, stainless steel tube wall thickness to achieve more than 2 mm, at least in the weight of 75 kg of vertical down won't produce bending and deformation.

第四，扶手彎頭弧度要適合，一般使扶手距離墻在5cm~6cm之間，不能太寬和太窄，太窄會使手碰到墻壁，太寬時可能會令老年人和殘疾人一不小心沒握好卡住手臂。

Fourth, handrail elbow radian to fit, more make the armrest from the wall between 5 cm and 6 cm, not too wide or too narrow, can make hand to touch the wall is too narrow, too wide may make the elderly and disabled people accidentally didn't hold well stuck arm.

因此，質量好的無障礙扶手是采用具有抗菌功能的工程塑料或合成塑料包裹2mm厚度以上的不銹鋼管制作而成，表面沒有任何塑料毛刺和接縫，手感把握很舒適的產品。

Therefore, quality good barrier-free rail is the antimicrobial function of engineering plastic or synthetic plastic package more than 2 mm thickness, were made with stainless steel surface without any plastic burr and juncture, feel very comfortable product.